Skip to content
pcbottlenecktest
Menu

Free · No signup

PC Bottleneck Calculator

Pick your CPU and GPU to see which one limits FPS at 1080p, 1440p and 4K, how big the gap is, and whether an upgrade is worth it. A plain-English verdict in seconds, with upgrade ideas that skip near-equal parts.

Selected: AMD Ryzen 7 9800X3D
Selected: NVIDIA GeForce RTX 3060

Gaming: balanced CPU/GPU demand for typical play.

Try an example

Healthy GPU-bound

GPU-bound, healthy for gaming

Gauge = unused headroom on the non-limiter (CPU headroom unused). Bar = relative CPU vs GPU capacity share in this estimate.

What do these numbers mean?

CPU capacity (66%) GPU capacity (34%)

No upgrade needed for balance.

Data: manufacturer specs + our Relative Gaming Index (RGI). Updated 2026-10-10. Editors · How RGI is built

What this bottleneck checker does

This free PC bottleneck calculator is a CPU and GPU bottleneck checker for desktop gaming PCs. Pick a processor and graphics card, set resolution (1080p, 1440p or 4K), and read whether the pair is CPU-limited or healthily GPU-bound. The estimate uses our Relative Gaming Index — not a copied benchmark table — and stays honest about FPS: the number is the lower of GPU throughput and a CPU frame ceiling, labelled as an estimate. Use it to compare upgrades before you buy, then confirm utilization in a game you actually play.

How to use the bottleneck calculator

  1. 1. Choose your CPU

    Search the processor list by model, for example “5600” or “12400F”. Desktop Ryzen and Intel Core chips from several generations are included.

  2. 2. Choose your GPU

    Pick the graphics card you own or plan to buy, from GeForce RTX 50 and Radeon RX 9000 back to popular older cards.

  3. 3. Set resolution and use case

    Choose 1080p, 1440p, 4K or ultrawide, plus RAM and use case. Open Advanced options for refresh rate (60–240 Hz), graphics preset, RAM type and storage — each one shifts the CPU/GPU balance.

  4. 4. Read the verdict and upgrades

    See which part limits FPS, how large the gap is, an FPS estimate, and good / better / best upgrades. Every result is an estimate — read the methodology and confirm in a game you play.

How to tell if your PC is bottlenecked

The calculator gives a starting point; an overlay in a real game confirms it. Turn on MSI Afterburner or the NVIDIA/AMD performance overlay, remove any FPS cap or V-Sync, and play a demanding scene. Then compare with this table.

What the overlay showsWhat is limitingWhat to do
GPU usage 95–100%, CPU lowerGPU-bound — healthy for gamingNothing to fix. For more FPS, lower settings, use DLSS/FSR, or upgrade the GPU.
GPU clearly below 95%, one or more CPU threads near 100%CPU-limitedTry the free fixes below, lower CPU-heavy settings (crowds, view distance), or plan a CPU upgrade.
Lowering resolution barely changes FPSCPU-limitedA faster GPU will not help much here; the processor sets the ceiling.
Lowering resolution raises FPS clearlyGPU-boundThe graphics card sets the ceiling; a GPU upgrade raises FPS.
Both CPU and GPU usage low, FPS flatFPS cap, V-Sync or the game engineCheck frame caps and driver settings before blaming hardware.

Overall CPU usage can read 40–60% while a game is still CPU-limited, because many games lean on a few threads. Watch per-thread load, not just the total.

How to read the percentage

The big number is unused headroom on the non-limiter side — not “how broken” the PC is. For gaming, GPU-bound results stay green at any gap size. The severity scale below applies mainly to CPU-bound cases. Full walkthrough: How to read bottleneck calculator results.

Estimated gapMeaning (CPU-bound)
0–10%Excellent balance for the selected settings.
10–20%Mild gap — usually fine; watch high-refresh play.
20–30%Noticeable — consider a CPU upgrade if you need more FPS.
30%+Large CPU-side gap — the CPU is clearly setting the ceiling.
Any % · GPU-boundHealthy for gaming — unused CPU headroom is expected, not a fault.

Example from our model: Ryzen 5 5600 with RTX 3060: at 1080p it is GPU-bound (~11% CPU headroom unused), and at 4K GPU-bound (~46% CPU headroom unused). The same Ryzen 5 5600 with RTX 4090 is CPU-limited (~38% GPU headroom unused) at 1080p and roughly balanced (~2% gap) at 4K, so the limiting part changes as resolution rises. Open the 5600 + RTX 3060 page or the 5600 + RTX 4090 page for the full breakdown.

How to fix a bottleneck

Free fixes first

Then upgrade the right part

Popular CPU and GPU combinations

Estimates at 1080p, 1440p and 4K with gaming use and high settings. Open a pair for FPS, upgrade options and the full breakdown.

Popular GPUs

Best-CPU hubs for cards people actually search. Estimates at 1440p High.

All GPU hubs

Popular CPUs

Best-GPU hubs for current and last-gen gaming chips.

All CPU hubs

Guides

How to read the estimate, when RAM matters, and what to upgrade first.

All guides

Frequently asked questions

What is a PC bottleneck?

A bottleneck is when one part of your PC (often the CPU or GPU) reaches its limit before the other, so FPS or frame times stop improving under your settings.

Can my CPU be a bottleneck?

Yes. When the processor cannot prepare frames as fast as the graphics card can draw them, the GPU sits below full load and FPS stops rising. It shows up most at 1080p, at high refresh rates, and in strategy, simulation and busy open-world games.

Can my GPU be a bottleneck, and is that bad?

Yes, and for gaming that is usually the goal. GPU-bound means the graphics card is fully used while the CPU still has headroom. A faster GPU raises FPS; a faster CPU does little. We only treat CPU-side limiting as the main problem case.

How can I tell if my PC has a bottleneck?

Turn on an overlay such as MSI Afterburner or the NVIDIA/AMD performance overlay and play a demanding scene with no FPS cap. GPU usage at 95% or more means the graphics card is the limit. Clearly lower GPU usage with one or more CPU threads near 100% points to the processor. Lowering resolution one step confirms it: if FPS barely moves, the CPU is the limit.

How does the bottleneck calculator work?

Each CPU and GPU has a score on our Relative Gaming Index. The calculator raises the graphics load for your resolution and settings, raises the processor load for your refresh rate and use case, then compares the two. Whichever side runs out first is the limit, and the gap is the percentage. FPS is the lower of the GPU throughput and a CPU frame ceiling. RAM and storage apply small adjustments.

How accurate are the results and FPS numbers?

They are estimates from relative performance indexes and workload assumptions — not measured benchmarks for a specific game. Use them for orientation, then confirm with in-game overlays (CPU/GPU utilization and frame times) before buying.

What does the percentage mean?

It is unused headroom on the non-limiter side after resolution, settings, refresh rate and use-case demand — not a measured FPS loss from a specific title.

Is a 15% CPU bottleneck bad?

Around 15% CPU-side limiting is where many players start noticing unused GPU headroom in CPU-heavy scenes. Under ~10% is typically fine.

Does RAM affect bottlenecks?

Capacity and type can. 8GB is often tight for modern games; DDR5 can help on platforms that benefit from it. We apply a soft factor, not a full memory simulator.

Does higher resolution reduce CPU bottleneck?

Often yes. Higher resolutions raise GPU load, so many CPU-bound 1080p builds look more GPU-bound at 1440p or 4K.

Should I upgrade CPU or GPU first?

Upgrade the true limiter for your target resolution and refresh rate. If you are healthily GPU-bound, a GPU upgrade raises FPS; a CPU upgrade may do little.

Can I fix a bottleneck without buying new parts?

Often, partly. Turn on XMP or EXPO for your RAM, run memory in dual channel, update the GPU and chipset drivers, close background apps, set Windows to a performance power mode, and check temperatures for throttling. For a GPU limit, lowering settings or using DLSS/FSR also helps.

Is this the same as a PC compatibility checker?

We estimate performance balance, not physical compatibility (socket, PSU connectors, case clearance). Always check platform requirements separately.

Why do Reddit threads disagree with calculators?

Games, drivers, background apps and 1% lows vary. Calculators give a directional estimate; community reports capture specific titles and settings.

Can storage bottleneck a gaming PC?

HDDs can hurt load times and stutter; they rarely change average GPU-bound FPS the way a weak GPU does. Prefer NVMe for modern titles.